HQT Analog Series TH-7500
TH-7500
TH-7500

HQT MID-END ANALOG SERIES TH-7500

HQT TH-7500 is a professional two-way radio. LCD display offers users a direct idea of current radio status. It provides stable performances even in severe environments. Excellent functions make communication much easier and more accurate. Moreover, TH-7500 is designed by following MIL-STD-810C/D/E/F standard. Therefore, TH-7500 is a perfect model for police, military and professional requirements.


  •  TOT;
  •  VOX;
  •  Monitor;
  •  128 Channels;
  •  High/Low Power Switch;
  •  Busy Channel Lockout (BCL);
  •  Frequency Scan/Channel Scan;
  •  Battery Power Indication and Alert.


TI OMAP SERIES is recommended for customized needs and requirements.

Please contact our sales consultants for more product information. Get Support >>>



Main Functions

Beat Frequency & Reverse Frequency

Press the corresponding function key to activate beat frequency or reverse frequency instead of re-programming parameters to change RX and TX between point- to- point communication and under repeater communication.

Frequency Scan/Channel Scan

Multi-mode scan is convenient for team leader to monitor the on-site situations.

PTT ID Encode (DTMF) /Decode

It provides identification of radio to control center or radio with DTMF decode, it is quite useful for communication management. ENI will be sent when you press or release PTT button if this function is on.

128 Channels

A large channel capacity allows more flexible assignment among different user groups.

Monitor

To hear a weak signal, press MONI key. And it helps adjust volume when no signal is received.

BCL

BCL is used to prevent the interference with the on-going conversation.

5 Signaling

CTCSS, CDCSS, DTMF, 2-Tone and 5-Tone can be used in selective call/group call/remote kill/remote control function.

Emergency Alert

In case of emergencies or unexpected events, the radio will automatically send alarm immediately while the alarm button is pressed. In addition, the background or ID code can be secretly sent out to notify your partners.

Lone Worker

Press the programmable key to start lone worker mode in order to make sure the owner of the two-way radio could be safe while working alone. When the set time is over, it would announce prompt voice, then you have to press the safety key or it would alarm automatically.

VOX

Hands-free operation is available when VOX function is turned ON.

Talk Confirmation Tone

Release PTT when the conversation is over and the receiver will hear the roger tone

TOT

The feature allows for more efficient use of channels by limiting the amount of time of each transmission. Also, it effectively avoids radio damage because of long-time transmission.

High/Low Power Switchable

The radio can be switched between low power and high power. When talk range is small, the radio can be switched to low power to save battery power.

25kHz/12.5kHz Switchable

Different channel spacing 25kHz /12.5kHz are optional to comply with the regulations of different countries.

Battery Power Indication and Alert

User can easily know the battery power state from the LCD display at a glance. And LED flashes red to remind users to replace or charge the battery when the battery power is low.

Squelch Tail Elimination

The function will minimize the annoying audio outputs that occur at the receiver on completion of a transmission.

Wired Clone

To quickly set the parameters on a radio, you can clone the radio data from another radio with the supplied data cable, saving the time of parameter setting.

PC Programmable

Frequency and various features can be set by PC programming software.



 

General

Frequency Range

VHF: 136-174MHz

UHF: 400-470MHz; 450-520MHz

Channel Capacity

128

Channel Spacing

25.0kHz / 12.5kHz

Frequency Stability

±1.5ppm

Operating Temperature

-25 ~ +55

Antenna Impedance

50Ω

Operating Voltage

7.4V

Dimensions (H×W×D)

109×55×32mm

Weight (With Antenna & Battery)

245g

Battery

1800mAh (Li-Poly Battery)

Receiver

Sensitivity

0.22μV / 0.25μV  

Adjacent Channel Selectivity

70dB / 60dB

Intermodulation Rejection

65dB

Spurious Response Rejection

70dB

S/N

45dB / 40dB

Rated Audio Power Output

1W

Rated Audio Distortion

≤5%

Transmitter

RF Power (H/L)

UHF: 4W/1W  VHF: 5W/1W

Modulation Type

16KΦF3E / 8KΦF3E

Modulation Limiting

5kHz / 2.5kHz   

FM Distortion

≤5%

Residual FM

-45dB / -40dB

Adjacent Channel Power

-70dB / -60dB

Spurious and Harmonics

≤-36dBm

 



Accessory List

Standard Accessories

Antenna   Li-Poly Battery   Charge Adapter   Intelligent Charger   Belt Clip   Hand Strap

Optional Accessories

Earpiece Mic   Remote Speaker Microphone   Programming Cable


 
Top inquire