HQT Analog Series TH-3608
TH-3608
TH-3608
TH-3608
TH-3608

HQT MID-END ANALOG SERIES TH-3608

HQT TH-3608 is a very useful two-way radio for routine communication and dispatching. It has a big list of features: good quality, clear voice, large talk range, stable performance, ergonomic design, meeting MIL-STD-810 C/D/E/F and IP54 rain-resistant standard. All these features are just in a simple-outlined radio.
  • TOT;
  • Monitor;
  • CTCSS/CDCSS;
  • Low Battery Alert;
  • Precision Knob Design;
  • Squelch Tail Elimination;
  • Busy Channel Lockout (BCL).
TI OMAP SERIES is recommended for customized needs and requirements.

Please contact our sales consultants for more product information. Get Support >>

CTCSS/CDCSS
CTCSS/CDCSS encode & decode can prevent conversation from any unwanted receiver.
25.0 kHz/ 12.5 kHz Switch
Different channel spacing 25.0kHz /12.5kHz are optional to comply with the regulations of different countries.
Priority Channel Scan
Priority scan permits scanning of all channels while a priority channel is being monitored simultaneously. And this function is still activated even while user is receiving a call from another non-priority channel.
Low Battery Alert
This feature can remind users to replace or charge the battery when the battery power is low.
Monitor
This feature enables user to hear weak signals. User can adjust volume by pressing MONI key when no signals are received.
Precision Knob Design
Fully considering of the practical operating scene, the switch and knob are carefully designed. And users can clearly know the channel position through touching even with protective gloves on.
Busy Channel Lockout (BCL)
BCL is used to protect the on-going conversation from unwanted interference.
TOT
The feature allows for more efficient use of channels by limiting the amount of time of each transmission. Also, it effectively avoids radio damage because of long-time transmission.
Wired Clone
To quickly set the parameters on a radio, you can clone the radio data from another radio with the supplied data cable, saving the time of parameter setting.
Beat Shift
Avoid the interference of dominant frequency on the performance of the radio.
Squelch (1~9 selectable)
It can minimize interference from undesired weak signals and enable weak signals to be heard.
Squelch Tail Elimination
The function will minimize the annoying audio outputs that occur at the receiver during a transmission.
PC Programming
Frequency and various features can be set by PC programming software.
General
Frequency Range VHF: 136-174MHz
UHF: 400-420MHz; 450-470MHz
Channel Capacity 16 (15+S)
Channel Spacing 25.0kHz / 12.5kHz
Frequency Stability ±2.5ppm
Operating Temperature -25℃ ~ +55℃
Antenna Impedance 50Ω
Operating Voltage 7.4V
Dimensions (H×W×D) 125×58×37mm
Weight (With Antenna & Battery) 276g
Battery 2300mAh (Ni-MH Battery)
Receiver
Sensitivity 0.22μV / 0.25μV
Adjacent Channel Selectivity 70dB / 60dB
Intermodulation Rejection 65dB
Spurious Response Rejection 70dB
S/N 45dB / 40dB
Rated Audio Power Output 1.5W
Rated Audio Distortion ≤5%
Transmitter
RF Power (H/L) UHF: 4W/1W VHF: 5W/1W
Modulation Type 16KΦF3E / 8KΦF3E
Modulation Limiting ≤5kHz / 2.5kHz
FM Distortion ≤5%
Residual FM -45dB / -40dB
Adjacent Channel Power -70dB / -60dB
Spurious and Harmonics ≤-36dBm

Accessory List

Standard Accessories
Antenna Ni-MH Battery Charge Adapter Intelligent Charger Belt Clip Hand Strap
Optional Accessories
Earpiece Mic Remote Speaker Microphone Programming Cable
 
Top inquire